Investigator, MEMS, Microfluidics & Nanoelectronics Lab
Assistant Professor, Mechanical Engineering
Research Interests: Microfluidics, MEMS, Computational Heat Transfer, Simulation of Thermal Systems, Bio Heat Transfer
Ph. D. in Mechanical Engineering from BITS PILANI, Pilani Campus
M. Tech. in Thermal Engineering from MANIT, Bhopal
B.E. in Mechanical Engineering from Pt. R.S.U Raipur
Member of The Institutions of Engineers (India) IEI, Membership number: M-148101-5
Member of Indian Society of Heat and Mass Transfer( ISHMT), Membership number: 649
Member of American Society of Mechanical Engineering (ASME), Membership number:1001897
Dr. Satish Kumar Dubey
E-205, Department of Mechanical Engineering
BITS-Pilani, Hyderabad Campus
Jawahar Nagar, Shameerpet
Hyderabad 500078, India
Phone: 040-66303 673 (office)
Email: firstname.lastname@example.org, email@example.com
Microfluidics Based Integrated Based Integrated System for Nitrite and Nitrate Detection and Analysis
Inventors: Sohan Dudala, Satish K Dubey and Sanket Goel
Status: Indian Patent Filed (201911004347, February-2019)
Sulake, S., Dubey, S. K. & Javed, A. Heat Transfer Simulation and Robust Design of Radio Frequency Ablation Procedure for Breast Tumor (Under review)
Rao, L. T., Dubey, S.K., Javed A. & Goel, S. Statistical Performance Analysis and Robust Design of Paper Microfluidic Membraneless Fuel Cell with Pencil Graphite Electrodes, (Under review)
Kumar, A. U., Dubey, S. K. & Javed, Conjugate Heat Transfer Simulation and Parametric Sensitivity Analysis for Optimum Performance of Converging and Diverging Microchannel Heat Sink (Under review)
Kumar, A. U., Dubey, S. K. & Javed, Optimization of Converging and Diverging Micro channel Heat Sink for Electronic Chip Cooling (Under review)
Rao, L.T., Rewatkar, P. Dubey, S.K., Javed, A., Goel S. Performance Optimization of Microfluidic Paper Fuel Cell with Varying Cellulose Fiber Papers as Absorbent Pad. (Under review)
Dudala. S., Dubey, S. K. & Goel, S. Microfluidic Soil Nutrient Detection System: Integrating Nitrite, pH and Electrical Conductivity Detection, (Under review)
Dudala. S., Dubey, S. K. & Goel, S..(2019) Fully Integrated, Automated and Smartphone enabled Point-of-Source Portable Platform with Microfluidic Device for Nitrite Detection, IEEE Transactions on Biomedical Circuits and Systems (Accepted) (SCI)
Kumar, A. U., Dubey, S. K. & Javed, (2019). Numerical Simulation of Flow Boiling In Micro Channel to Study Bubble Dynamics. Proceeding of the ASME Summer Heat Transfer Conference. ASME. (Accepted) (Scopus)
Sulake, S., Dubey, S. K. & Javed, A. (2019). Numerical Heat Transfer Simulations and Parametric Investigations using Crossed Array Design of Experiments Approach during RFA of Breast Tumour. Proceeding of the ASME Summer Heat Transfer Conference. ASME. (Accepted) (Scopus)
Kumar, A. U., Javed, A., & Dubey, S. K. (2019). Numerical Modelling of Flow Boiling in Expanding Microchannel with Non-Uniform Heat Flux Journal of Physics: Conference Series, Vol. 1276 (1). (Scopus)
Rao, L.T., Goel, S., Dubey, S. K., & Javed, A. (2019). Micromixer with Different Obstacles, Journal of Physics: Conference Series, Vol. 1276(1). (Scopus)
Kumar, A. U., Javed, A., & Dubey, S. K. (2018). Material selection for microchannel heatsink: Conjugate heat transfer simulation Materials Science and Engineering; Conference Series: Vol. 346 (1). (Scopus)
Dubey, S. K., & Srinivasan, P. (2014). Development of Three Dimensional Transient Numerical Heat Conduction Model with Growth of Oxide Scale for Steel Billet Reheat Simulation. International Journal of Thermal Sciences, 84, 214-227 (SCI)
Dubey, S. K., & Srinivasan, P. (2014). Steel Billet Reheat Simulation with Growth of Oxide Layer and Investigation on Zone Temperature Sensitivity. Journal of Mechanical Science and Technology, 28(3), 1113-1124 (SCIE)
Dubey, S. K., & Srinivasan, P. (2013). Three Dimensional Transient Explicit Finite Difference Heat Transfer Modeling of Billet Transport. International Journal of Thermal & Environmental Engineering, 6(2), 95-100.
Dubey, S. K., Agarwal, N., & Srinivasan, P. (2012). Three Dimensional Transient Heat Transfer Model for Steel Billet Heating in Reheat Furnace. Proceeding of the ASME Summer Heat Transfer Conference. 2, pp. 963-967. Rio Grande, Purto Rico, USA: ASME. doi:10.1115/HT201258151 (Scopus)
Dubey, M., Rajput, S. P., Dubey, S. K., & Tiwari, A. (2008). Pros and Cons of Adopting CO2. as a Viable, Alternative, Natural Refrigerant. Journal of Environmental Research and Development, 2(4), 737-758
Dudala. S., Puneeth, S. B., Dubey, S. K. & Goel, S..(2018), Design of Fluorometric Lab-On-Chip Platform for Detection of Nitrite in Water, International Conference on Fiber Optics and Photonics, Indian Institute of Technology Delhi, New Delhi, India.
Rao, L. T., Arvind, B. K, Dubey, S. K. & Javed, A. (2018) Numerical Simulation and Optimization of Micromixer, Symposium and Workshop for Analytical Youth in Applied Mechanics, BITS Pilani, K. K. Birla Goa Campus, India.
Gupta, K., Maurya, S., Kalra, V., & Dubey, S. K. (2015).Heat Transfer Simulation of an Active Electronic Module with Thermoelectric Generators. Proceedings of the 23rd National Heat and Mass Transfer Conference and1st International ISHMT-ASTFE Heat and Mass Transfer Conference,(IHMTC2015- 990).ISRO Thiruvananthapuram, India.
Srinivasan, P., & Dubey, S. K. (2015). Internalising the External Cost of Electricity Generation- An Approach for the Economic Viability of Renewable EnergyBased Power Generation. 5 th International Conference on Advances in Energy Reaserch (ICAER 190). IIT, Bombay, India.
Dubey, S. K., & Srinivasan, P. (2013). Transient Heat Conduction Model and its Application to Billet Transport Simulation with Oxide Scale. Proceedings of 22nd National and 11th International ISHMT- ASME Heat and Mass Transfer Conference (HMTC1300139). IIT Kharagpur, India: ISHMT-ASME
Dubey, S. K., & Srinivasan, P. (2012). Heat Transfer Simulation of Pusher Reheat Furnace. National Conference on Modelling, Computational Fluid Dynamics & Operations Research. BITS, Pilani, India.
Dubey, S. K., & Srinivasan, P. (2011). Transient Heat Transfer Modeling and Simulation of Hot Billet Transport for Temperature Predictions and Energy Efficiency. Proceedings of 21st National and 10th International ISHMT- ASME Heat and Mass Transfer Conference (pp. 251-256.). IIT, Madras, India: ISHMT-ASME
Tekawande, A., Dubey, S. K., & Srinivasan, P. (2010). Simulation of Induction Heating Model in Pipe Bending Process. Proceedings of the 3rd International Conference on Advances in Mechanical Engineering, (pp. 313-318). SVNIT, Surat, India.
Dubey, M., Rajput, S., & Dubey, S. (2007). Computer Aided Performance Analysis of Transcritical CO2 (R-744) Refrigeration Cycle with Ejector Expansion. Proceedings of International Conference on Modeling Simulation, (pp. 348-355). CIT, Coimbatore, India.