MMNE Lab - Major Equipment
Other Miscellaneous Equipment
Click on Equipment Name (or Image) for detailed specifications & to visit OEM Website!
Ossila's Four-Point Probe System is an easy-to-use tool for the rapid measurement of sheet resistance, resistivity, and conductivity of materials.
Voltage range: ±100 μV to ±10 V
Current range: ±1 μA to ±150 mA
Sheet resistance range: 3 to 10 (ohms per square)
Measurement accuracy: < ±4%
Measurement precision: ±0.5%
Desktop Water Purification System for two qualities of water Type I Water (Ultrapure Water), Type II Water (Pure Water)
Output Rate (Type 1): 3 l/h
Output Rate (Type 1): 1.1 l/min
10 l RO Pressreised Tank
Final 0.22 µm Filter & Foto-Oxidation Lamp
Primarily for deposition of thin coatings of liquid on the different substrates (glass, PCB, Si Wafer).
100 – 10000 Rotations per minute
15 programs preset editable programs, 20 steps with 1-9999 seconds gap per step
Chuck Sizes Available: 25 & 75 mm
PC & Keypad Control
A pair of Holmarc Syringe/Infusion pumps with controllers are used for our various microfluidics applicaitons involving precision controlled circulation like droplet microfluidics, particle encapsulation, etc.
Compatible Syringes: 5ml to 60 ml (Standard Off the shelf syringes)
Flow Rates: 15.63 μl/hr to 36.2 ml/min (Dependent on syringe size & Manufacturer)
Dispensing accuracy of +/- 1 %
Control: On-board controller or PC (via RS-232 interface)
Advanced Hot Air Oven (50-330 °C)
Make: Thermo Scientific
Temperature: 50 to 330 °C
Chamber Volume: 3.5 Cubic Feet / 97 Liters (2 Shelves)
FDM based 3D printing up to 100µm accuracy with PLA, ABS and PCL Materials.
Range: 20-2,00,000 cP
Small sample adapter volume: ~ 5 ml
Display for Results and Temperature
With Low viscosity adapter (0.1 -20 cP)
Number of spindles: 4
Mega A3 Mega Drive Laminator
Max width 325 mm
Maximum Substrate Thickness: 3mm
Mega Electronics AY315 UV Expoure Unit
6 x 15W UV Tubes
Working Area: 260 x 355 mm