• • Lecturer in Caledonian College of Engineering, Oman, (affiliated to Glasgow Caledonian University, Scotland, UK), from June 2014 to July 2015

  • Lecturer in BITS Pilani, Pilani Campus, from May 2009 to May 2014

  • Assistant Lecturer in BITS Pilani, Pilani Campus, from Jan 2009 to April 2009

  • Teaching Assistant in BITS Pilani, Pilani Camps, from Aug 2006 to Dec. 2008

• Ph. D. in Mechanical Engineering (Topology Optimization) from BITS PILANI, Pilani Campus (2014)

• M. E. in Mechanical Engineering from BITS PILANI, Pilani Campus (2008)

• B. Tech. in Mechanical Engineering from Bundelkhand Institute of Engineering and Technology, Jhansi, U.P. (2004)

1. Delivered expert lecture in a National Workshop on “ENGINEERING DRAWING” organized by the department of Mechanical Engg., JIET, Barabanki, U.P., from 16th to 18th March 2012.

2. Delivered expert lecture in a National Workshop on “ENGINEERING DRAWING-the Language of Engineers” organized by the department of Mechanical Engg., BRCM-CET, Bahal (Bhiwani), Haryana, from 23th to 25th September 2011.

3. Delivered expert lectures during the sessions of “Workshop on MATLAB”, organized for the faculty of Engg. colleges & Polytechnic of Madhya Pradesh during 17th to 22nd Jan. 2011, in association with MP State Facilitation Unit, Directorate Technical Education Madhya Pradesh, Bhopal.

Dr. Arshad Javed

Department of Mechanical Engineering

BITS Pilani, Hyderabad Campus

Jawahar Nagar, Shameerpet Mandal

Hyderabad 500078, Telangana, India

Phone: 040-66303 684 (office)

Email: arshad@hyderabad.bits-pilani.ac.in

Journal Publications

1. Arshad Javed, Joshua Amrith Raj, and BK Rout. “Integrated Method for Performance Analysis of Reliability-Based Topologically Optimized Components.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, August 2019, vol. 233(19–20), pp.7019–7040. doi:10.1177/0954406219865757. (SCI indexed)

2. Arshad Javed & Rout, B.K., “Tolerance range selection of topologically optimized structures with the effects of uncertainties of manufacturing process”. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, December 2014; vol. 228, 18: pp. 3441-3461. (SCI indexed)

3. Arshad Javed & Rout, B.K., “Tolerance range section of topologically optimized structure using combined array design of experiments approach”. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, September 2013; vol. 227, 9: pp. 2023-2038. (SCI indexed)

4. Arshad Javed & Rout, B.K., “Investigation on parametric sensitivity of topologically optimized structures”. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, November 2012; vol. 226, 11: pp. 2791-2804. (SCI indexed)

5. Amitabh Kumar & Arshad Javed, “Simulation of dynamic performance reliability for indigenously developed 3DOF manipulator”. International Journal of Mechanical Engineering and Materials Science, January-June 2015; vol. 8, 1: pp. 35-39. (Conference paper selected for journal publication)

6. Arshad Javed, Sengar, A.K., & Rout, B.K., “A FEM and image processing based method for simulation of manufacturing imperfections. Asian Review of Mechanical Engineering, July-December 2012; vol.1, 2: pp. 1-5. (Conference paper selected for journal publication) 

Conference Papers

1. G. Lakshmi Srinivas & Arshad Javed. (2019). A Review on Optimization Methods to Enhance Energy Efficiency of Robots. National Conference on Multidisciplinary Design, Analysis, and Optimization NCMDAO, M.S Ramaiah Institute of Technology, Bangalore, 22-23 March 2019.

2. G. Lakshmi Srinivas & Arshad Javed. (2019). Topology optimization of industrial manipulator-link considering dynamic loading. International Conference on Materials Processing and Characterization ICMPC, Gokaraju Rangaraju College, Hyderabad, 8-10 March 2019. IOP Publishing

3. Sandeep Sulake, Satish Kumar Dubey, Arshad Javed (2019). Numerical Heat Transfer Simulations and Parametric Investigations using Crossed Array Design of Experiments Approach during RFA of Breast Tumor, Proceedings of the ASME 2019 Summer Heat Transfer Conference,HT2019, July 15-18, 2019, Bellevue, WA, USA.

4. Uday Kumar, A., Dubey. S. K., & Javed, A. (2019). Numerical Simulation of Flow Boiling In Micro Channel To Study Bubble Dynamics. In ASME Summer Heat transfer conference.

5. G. Lakshmi Srinivas, C. Joshua Amrith Raj & Arshad Javed. (2018). Topology Optimization of Rotating Mechanical Members. International Conference on Symposium and Workshop for Analytical Youth in Applied Mechanics SWAYAM, BITS Pilani Goa campus,4-6 July 2018.

6. G. Lakshmi Srinivas & Arshad Javed. (2018). Numerical Simulation and Experimental Study on Lightweight Mechanical member. International Conference on Advanced Engineering Optimization through Intelligent Techniques AEOTIT, SVNIT-Surat, 3-5 Aug 2018. 

7. Lanka T.R., A., Dubey. S. K., & Javed, A., (2018). “Numerical Simulation and Optimization of Micromixer Performance” Symposium and Workshop for Analytical Youth in Applied Mechanics (SWAYAM) 2018 BITS Pilani, K. K. Birla Goa Campus, 4th– 6th July, 2018 .

8. Lanka T.R., A., Dubey. S. K., & Javed, A., (2018) “Performance Investigation of T-shaped Micromixer with Different Obstacles” International Conference on Recent Advances in Fluid and Thermal Sciences (iCRAFT 2018) BITS Pilani, Dubai Campus, 5th– 7th Dec, 2018.

9. Uday Kumar, A., Dubey. S. K., & Javed, A. (2018). Numerical modelling of flow boiling in expanding microchannel with non-uniform heat flux. In IOP: Journal of Physics Conference Series.

10. Kumar, A. U., Javed, A., & Dubey, S. K. (2018, April). Material Selection for Microchannel Heatsink: Conjugate Heat Transfer Simulation. In IOP Conference Series: Materials Science and Engineering (Vol. 346, No. 1, p. 012024). IOP Publishing

11. Ruchik Mishra & Arshad Javed (2018). ROS Based Service Robot Platform, IEEE 4th International Conference on Control, Automation and Robotics, April 20-23, Auckland, New Zealand.

12. G. Lakshmi Srinivas, C. Joshua Amrith Raj & and Arshad Javed (2018). Topology Optimization of Rotating Mechanical Members, 1st Symposium and Workshop for Analytical Youth on Applied Mechanics(SWAYAM), July 04 – 06, BITS Pilani, K. K.Birla Goa Campus.

13. Lanka Tata Rao, K Aravind, Satish Kumar Dubey & Arshad Javed (2018). Numerical Simulation and Optimization of Micromixer Performance, 1st Symposium and Workshop for Analytical Youth on Applied Mechanics(SWAYAM), July 04 – 06, BITS Pilani, K. K.Birla Goa Campus.

14. Raj J.A., Javed A. (2017) Robust Design Methodology of Topologically Optimized Components Under the Effect of Uncertainties. In: Zeghloul S., Romdhane L., Laribi M. (eds) Computational Kinematics. Mechanisms and Machine Science, vol 50. Springer, Cham.

15. Moloy Das, Akshaya Agrawal, Abhinav Sonone, Rishabh Gupta, Deepak Upadhyay, YVD Rao and Arshad Javed (2016),  Developing a Bioinspired Pole Climbing Robot, IEEE International Conference on Robotics: Current Trends and Future Challenges (RCTFC), SASTRA University, Thanjavur, December 19 & 20. 2016.

16. Javed, A., Rout, B.K. (2015), Robust and Targeted Performance Design of Topologically Optimized Components using Statistical Method, Fifth International Conference on Product Lifecycle Modeling, Simulation and Synthesis (PLMSS-2015), BITS-Pilani, Hyderabad Campus, December 15-17, 2015.

17. Mohit, K., Milind, M., Rahul, P., & Javed, A. Intelligent lighting system for college classroom, In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 369-373). Kapurthala, Punjab, India, October 16-18, 2014.

18. Kulkarni, A., & Javed, A. Performance investigation of topologically optimized manipulator link, In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 342-345). Kapurthala, Punjab, India, October 16-18, 2014.

19. Amitabh, K., & Javed, A. Simulation of dynamic performance-reliability for indigenously developed 3-DOF manipulator, In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 253-257). Kapurthala, Punjab, India, October 16-18, 2014.

20. Shankar, A., Kumar, R., Bhandge, S.V., Shradhe, S.B., Srinivas, N., & Javed, A. Dynamic modeling of multi motioned hexapode. In Proceedings of International Conference on Computer Aided Engineering (CAE-2013), Indian Institute of Technology, Madras, (pp. 866-871). Chennai, India, December 2013.

21. Bhargav, T., Aggarwal S., Das, S.K., & Javed, A., "Design of a simplified four legged walker", In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 48-52). Kapurthala, Punjab, India, October 2013.

22. Javed, A., & Rout, B.K., "Parametric Sensitivity of Topologically Optimized Structures using RBTO Technique", In Proceedings of Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), Indian Institute of Technology, Delhi, (pp. 252-255). India, Dec.5-8, 2012.

23. Javed, A., Sengar, A.K., & Rout, B.K., "A FEM and Image Processing Based Method for Simulation of Manufacturing Imperfections", In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University,( pp. 255-229). Kapurthala, India, October 5-7, 2012.

24. Javed, A., Safal, M., & Rout, B.K., "Numerical Simulation of Compliance Variation for a Topology-Optimized Structure", In Proceedings of IEEE international conference on Process Automation, Control and Computing (PACC), (pp.1-5.). Coimbatore, Tamilnadu, India, July 20-22, 2011. D.O.I.: 10.1109/ PACC.2011. 5978893

25. Aqsa, M., Rwitajit, M., & Javed, A., "A Neural Network Based Approach for Error Minimization in the Inverse Kinematics Solution for 6-DOF Manipulator", In Proceedings of 5th international conference on advances in Mechanical Engineering, SVNIT, Surat, (pp. 936-939). India, June 6-8, 2011.

26. Javed, A., Rao, J.M., & Sasi, J.C., "Simulation of Performance-Reliability for Indigenously Developed Manipulator", In Proceedings of National Conference on Advances in Manufacturing Technology, National Institute of Technical Teachers' Training and Research, Chandigarh, (pp. 299-301). May 2013.

27. Javed, A., & Rout B.K., "Issues in Design for Manufacturing using Topology Optimization Method", Presented in National Conference on Modeling, Computational Fluid Dynamics & Operations Research under UGC-SAP, DRS I, Birla Institute of Technology & Science, Pilani, Rajasthan. February 4-5, 2012.

28. Javed, A., & Soni, G., “Quantifying Push and Pull in Supply Chain”, Proceedings of Twenty-seventh National Convention of Mechanical Engineers on Advances in MEMS and Robotics in Manufacturing Industries, Jaipur. September 3-4, 2011.

29. Gupta A., Javed A., & Rout B.K., “Chronicle of Humanoid Research at Birla Institute of Technology and Science, Pilani – AcYut” In Proceedings of Robotics Symposium, Research and Development Establishments (Engg.), Pune. April 29-30, 2011. 

30. Javed, A., Rout, B.K., & Mittal R.K., “Multi-Criteria Decision Making Tool to Select the Actuator of Industrial Manipulator”, In Proceedings of National Conference on Mechanism Science and Technology: from Theory to Application, N.I.T., Hamirpur, (pp 792-797). Nov 13-14, 2008.

31. Javed, A., Rout, B.K., & Mittal R.K., “A review on Compliant Mechanisms for MEMS applications”, In 2nd ISSS National Conference on MEMS, Micro-sensors, Smart Materials, Structures and Systems, Pilani. Nov.15-17, 2007.