MMNE Lab - Major Equipment

Full featured economical research grade potentiostat, can be customized to address all applications in the area of classical electrochemistry.

• Current range: 10 μA to 800 mA

• Current resolution: 760 pA

• Control voltage: ±10 V

• Compliance: 20 V range adjustable [-20;0:20]

• Voltage resolution: 5 μV

• EIS measurement from 10 µHz to 1 MHz

VLS 3.60 with 30 watt, 10.6 µm Co₂ Laser Source

• Laser Processing area: 609.6 X304.8 mm

• Laser max power: 30 Watt

• Engraving and Cutting operations are available

• Available Focus Lenses: Standard 2.0 & HPDFO Lens

Static and Dynamic contact angle measurement

• Number of Dispensers: 2

• 1280 x 1024 px Camera

• Max FPS : 2068

• Manual droplet Placement

• Manual YZ Sample Stage

• Frame intervals range: 0.33 ms to 1000 s

Profilm3D uses state-of-the-art white light interferometry (WLI) to measure surface profiles and roughness.

• Z Range: 100 mm

• XY Stage Range: 100 mm x 100 mm

• Camera: 2592 x 1944 (5 megapixels)

• Piezo Range: 500μm

• Thickness Range, WLI: 50 nm - 10 mm

Equipment capable of printing 2 sided PCBs

• Print area: 128 x 105mm

• 0.2 mm of minimum trace width

• Spindle Speed: 13,000 RPM

• Drill Bits: 0.07 to 1.60mm

• Bed Temperature: 240℃

• File Type: Gerber, USB Connectivity

OGF500 pack is a potetiostat & glvanostat for electrochemical measurment with maximum current of 500 mA.

• Current ranges: ±5 nA to ­±500 mA

• Current resolution: 0.003 % (±150 fA)

• Applied potential: ±15 V

• Compliance Voltage: ±20 V

4" substrate direct UV laser writer for mask less lithography.

• GaN laser diode, Wavelength: 405nm

• Spot size : 1 micron

• Resolution: 1 micron

• Maximum Intensity: 3 mW

• Z-axis travel: 20mm

• X and Y axis travel: 100mm

FDM based 3D printing up to 100µm accuracy with PLA, ABS and PCL Materials.

• Dimensions: 227L x 148W x 150H mm

• Nozzle Diameter: 0.4 mm

• Layer resolution: 100 – 500 microns

• Communication: USB, SD Card

• Positioning Precision: 2.5 µm (z-axis)

• Filament Diameter: 1.75 mm

Primarily for deposition of thin coatings of liquid on the different substrates (glass, PCB, Si Wafer).

• 100 – 10000 Rotations per minute

• 15 programs preset editable programs, 20 steps with 1-9999 seconds gap per step

• Chuck Sizes Available: 25 & 75 mm

• PC & Keypad Control

The Wanhao Duplicator 7 DLP uses the vat photopolymerisation 3D printing technology which is faster than SLA 3D Printing.

• Technology: DLP (Digital Light Processing)

• Build Volume: 120 x 68 x 180mm

• Layer Resolution: 35 microns

• Connectivity: USB

• Printable materials: 405 nm UV resin

Multipurpose tool with interchangeable tool heads capable of of FDM 3D printing (50 µm accuracy), CNC cutting/drilling and PCB Engraving.

• Work Area: 250 x 235 x 165 mm

• Nozzle Diameter: 0.4, 0.2 mm

• Layer resolution: 50 – 400 µm

• Communication: USB, SD Card

• Mechanical Precision : 0.6 µm for z-axis

Ossila's Four-Point Probe System is an easy-to-use tool for the rapid measurement of sheet resistance, resistivity, and conductivity of materials.

• Voltage range: ±100 μV to ±10 V

• Current range: ±1 μA to ±150 mA

• Sheet resistance range: 3 to 10 (ohms per square)

• Measurement accuracy: < ±4%

• Measurement precision: ±0.5%

A pair of Holmarc Syringe/Infusion pumps with controllers are used for our various microfluidics applicaitons involving precision controlled circulation like droplet microfluidics, particle encapsulation, etc.

• Model: HO-SPLF-01

• Compatible Syringes: 5ml to 60 ml (Standard Off the shelf syringes)

• Flow Rates: 15.63 μl/hr to 36.2 ml/min (Dependent on syringe size & Manufacturer)

• Dispensing accuracy of +/- 1 %

• Control: On-board controller or PC (via RS-232 interface)

FDM based 3D printing up to 100µm accuracy with PLA, ABS and PCL Materials.

• Range: 20-2,00,000 cP

• Small sample adapter volume: ~ 5 ml

• Display for Results and Temperature

• With Low viscosity adapter (0.1 -20 cP)

• Number of spindles: 4

• Mega A3 Laminator

  • Max width 325 mm

  • Maximum Substrate Thickness: 3mm

• Mega Electronics AY315 UV Expoure Unit

  • 6 x 15W UV Tubes

  • Working Area: 260 x 355 mm

  • Vacuum Supported